ComAp InteliMains NT User Manual

IGS-NT Communication Guide
34
3.2.4 Ethernet connection via IB-NT
Up to 32 controllers can be monitored via one IB-NT. Response time of a system with this type of connection
depends on number of controllers, higher number of controllers means slower system response time.
Controllers
Controllers IG-NT-BB IG-NTC-BB IS-NTC-BB IM-NT-BB IM-NTC-BB
Connection
applicable
YES YES YES YES YES
Available
ports
IB-NT IB-NT IB-NT IB-NT IB-NT
More info I-CR Module for CAN Bus Extension (page 67)
Controllers IG-NT IG-NTC IS-NT-BB IM-NT
Connection
applicable
YES YES YES YES
Available
ports
IB-NT IB-NT IB-NT IB-NT
More info I-CR Module for CAN Bus Extension (page 67)
Note: Max. 3 clients of ComAp type (InteliDDE server, WinScope, WebSupervisor) can be connected
simultaneously to the IB-NT.
Note: For more information about IB-NT internet bridge read IB-NT Global Guide.

ComAp InteliMains NT Specifications

General

Brand	ComAp
Model	InteliMains NT
Category	Controller
Language	English