Communication Guide, ©ComAp – March 2014 53
IGS-NT Communication Guide 03-2014.pdf
Active E-mail (SMS E-mail)
Controllers
Equipment
Ethernet connection, e-mail message box
Function
When active e-mails are activated for alarms on site (warning, shut-down…) the controller sends
e-mail message to the predefined e-mail address. The function and settings for Direct Ethernet port
connection and connection via external bridge IG-IB are the same.
Controller setup
(Setpoints/Comms settings group)
Act. calls/SMS: AcallCH1(-3)-Type = IB-E-MAIL
Act. calls/SMS: AcallCH1(-3)-Addr = email address (maximum
length of email address is 31 characters)
Act. calls/Acall+SMS lang: AcallCH1(-3)-Addr = 1, 2, 3, ...
Hint:
Number of language corresponds with number of language in GenConfig (card “Languages”).
To Next Page
Loading...
Need help?
General
