ComAp InteliGen NTC User Manual

Communication Guide, ©ComAp – March 2014 48
IGS-NT Communication Guide 03-2014.pdf
Web server adjustment
 Click to the "Webserver settings" icon in the toolbar to display the settings page.
 Select the controller language the web pages will appear in.
 Select the rate of automatic refresh of the scada page.
Internet connection via cellular network
Connection via Internet bridge IB-NT
What is InternetBridge-NT?
InternetBridge-NT is a communication module that allows connection of a single controller as well as
whole site to the Internet or Local area network. The connection to the Internet can be via built-in
cellular modem supporting 2G and 3G networks or Ethernet cable.
The module can be used for controllers from following product lines: IG-NT, IS-NT and IC-NT.
NOTE:
For proper operation it is necessary to update the controller firmware to a version which supports IB-
NT. For IG-NT and IS-NT standard branch the first version supporting IB-NT is 2.6.
For more information about IB-NT read IB-NT-2.0-Reference Guide.pdf.

ComAp InteliGen NTC Specifications

General

Brand	ComAp
Model	InteliGen NTC
Category	Controller
Language	English