ComAp IG-NTC GC - Available Firmware and Archive Sets; Bank Controller Compatibility; Gen-set Controller Compatibility

IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
9
Available Firmware and Archive sets
Bank Controller – firmware/hardware/archive compatibility:
Firmware (*.mhx)
InteliSys NT BaseBox
InteliSys NTC BaseBox
IS-NT-BC-1.2.0.mhx
Archives (*.ant)
InteliSys NT BaseBox
InteliSys NTC BaseBox
IS-BC-MINT-1.2.0.ant
Gen-set Controller – firmware/hardware/archive compatibility:
The subordinated Gen-set controller has to be loaded with appropriate FW, IGS-NT-3.3.0 and higher. The
special “XXX-MINT-BC” archive must be used.
Firmware (*.mhx)
For IG-NT-GC and IG-NTC-GC
For IG-NT-BB and IG-NTC-BB
For IS-NT-BB and IS-NTC-BB
IG-NT-GC-3.3.0
IG-NT-BB-3.3.0
IS-NT-3.3.0
Archives (*.ant)
For IG-NT(C) GC
For IG-NT-BB and IG-NTC-BB
For IS-NT-BB and IS-NTC-BB
IG-GC-MINT-BC-3.3.0
IG-BB-MINT-BC-3.3.0
IS-MINT-BC-3.3.0