IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
The setpoint shows the date from the internal RTC clock of the controller and can
be also used to readjust it.
NOTE:
If the controller is connected to other controllers via the CAN2 bus, the setpoints
#Time and #Date are automatically synchronized each hour with the controller
that has lowest address. If date/time is changed at one controller it is
automatically updated also in all other controllers in the group.
NOTE:
Setpoint with the symbol # are synchronized between controllers.
To Next Page
Loading...
