InteliLite
NT
– MRS10/11/15/16, SW version 1.5, ©ComAp – September 2009 9
IL-NT-MRS-1.5-Reference Guide.pdf
6. Plug RS 232 communication module into the slot of the controller.
7. Put back the small cover.
Hint:
When you insert RS 232 communication module, the boot jumper is hidden. For that reason we
recommend to use RS 232 communication module with the boot jumper placed on it. See pictures
below:
RS 232 communication module with the boot jumper.
To Next Page
Loading...
