ComAp InteliLite NT MRS19 User Manual

Step 3: Select the firmware version you would like to upgrade the controller to.(Shown below) *This
will overwrite all the configuration, inputs/outputs, ECU, Extension modules, ect., with what is in a
default archive. Make sure your existing one is saved!
Step 4: You will be asked if you want to overwrite setpoints by values from the default archive. *This
is up to you. If you select no, setpoints will remain the same as currently in controller.
Your controller firmware has been programmed!

ComAp InteliLite NT MRS19 Specifications

General

Brand	ComAp
Model	InteliLite NT MRS19
Category	Controller
Language	English