MK!II!Hardware!Installation!Manual:!Rev!1!
©2018!Comb!Communications!
!
MOUNTING INSTRUCTIONS
Gooseneck Mounting Recommendations
1. Ensure the gooseneck is installed according to manufacturer specifications.
2. Ensure that the gooseneck is installed in such a manner that it is easily reachable for
the drivers of vehicles.
3. Ensure that the gooseneck does not hamper traffic.
4. Ensure that there are no obstructions inside the gooseneck that can prevent the
electrical wires from being fed through.
5. Ensure that you have six (6) M8 stainless steel bolts, nylock nuts and washers to
secure the mounting plate.
The screws that attaches the mounting plate to the gooseneck is not
supplied and must be bought before installation.
Wall Mounting Recommendations
6. Ensure that there are no hidden electrical conduits or water pipes before drilling the
holes to secure the mounting plate.
FAILING TO DO THIS MAY CAUSE SERIOUS INJURY OR DEATH.
7. Ensure that you have three (3) 8 mm rawl bolts and washers to secure the mounting
plate to the wall.
The rawl bolts that attaches the mounting plate to the wall is not
supplied and must be bought before installation.
To Next Page
Loading...