Comb Communications MK II Plus - TEST PROCEDURE

!
!
MK!II!Hardware!Installation!Manual:!Rev!1!
©2018!Comb!Communications!
!
TEST PROCEDURE
Supervisor Code
Description
1. *#0001
Firmware version
2. *#0002
GSM signal strength.
3. *#0003
Synchronise the unit.
4. *#0004
Keypad reboot.
5. *#0005
Battery charge in percentage.
6. *#0007
Modem initialisation.
7. *#0008
Request board ID.
8. *#0010
SIM ICCID number.
9. *#0011
Modem IMEI number.
10. *#0012
Delete all SMS.
11. *#0013
Network status.
12. *#0014
TAP status enable/disable.
13. *#0015
Pull code.
14. *#0016
System status.