Comelit 8471S User Manual

Assistenza tecnica Italia 0346/750090
Commerciale Italia 0346/750091
Technical service abroad (+39)0346750092
Export department (+39) 0346750093
www.comelitgroup.com
PT
MANUAL
TÉCNICO
IT
MANUALE
TECNICO
EN
TECHNICAL
MANUAL
FR
MANUEL
TECHNIQUE
NL
TECHNISCHE
HANDLEIDING
DE
TECHNISCHES
HANDBUCH
ES
MANUAL
TÉCNICO
1
2
Manuale tecnico Smart kit monofamiliare Art. 8471S
Technical manual for single-family Smart Kit Art. 8471S
Manuel technique Smart kit un usager Art. 8471S
Technische handleiding Smart kit eengezinswoning Art. 8471S
Technisches Handbuch Smart Kit Türsprechanlage
für Einfamilienhaus Art. 8471S
Manual técnico Smart Kit unifamiliar art. 8471S
Manual técnico Smart Kit monofamiliar art. 8471S

Comelit 8471S Specifications

General

Type	Video Intercom
Display	Yes
Camera	Yes
Connectivity	Wired
Power Supply	24V DC
Colour	White
Display Type	LCD
Mounting	Surface
Camera Sensor	CMOS
Operating Temperature	-10°C to +55°C

Summary

Technical Manual for Single-Family Smart Kit Art. 8471S

Programming Range and Ringtones

Programming Input IN1 for LED/Alarm/Door-Opener/Actuator

Special Programming Art. 4882

General Information

External Unit

Details about the external unit, including art. numbers.

Internal Units

Details about internal units, including art. numbers.

Warnings

Important safety and installation warnings.

General Installation and Operating Instructions

Operating Distances Table

Table showing maximum cable distances for different configurations.

Operation

Description of Button Functions and Settings

Settings for Monitor Art. 6302 and Style Door-Entry Phone

Additional Main or Secondary Monitors

Default Button Settings

Programming Buttons for Generic or Coded Actuator

Programming for Intercom Call

Programming/Deleting Intercom Address

Programming Buttons for Intercom Call

Programming Buttons for Other Functions

Enabling/Disabling Automatic Response

Monitor Ringtone Selection

Direct Programming of Intercom Call

Step 1: Enter Programming Mode

Step 2: Intercom Audio Volume Adjustment

Step 3: Intercom Call Programming

Step 4: Programming Other Internal Units

Programming Reset

Restoring the system to its factory default settings.

Programming Range and Ringtones (Page 18)

Range Minimum Address

Sets the minimum address for range configuration.

Range Maximum Address

Sets the maximum address for range configuration.

Enable Range

Activates the range setting.

Disable Range

Deactivates the range setting.

Programming IN1 Input for Indication (Page 19)

Input IN 1 -> LED (default)

Configures IN1 input for LED indication (default).

Input IN 1 -> ALARM

Configures IN1 input for alarm signal.

Input IN 1 -> LOCK-RELEASE

Configures IN1 input for lock-release function.

Input IN 1 -> CODED ACTUATOR

Configures IN1 input for coded actuator.

Input IN 1 -> GENERIC ACTUATOR

Configures IN1 input for generic actuator.

Special Programming - Art. 4882 (Page 20)

Lock Release Functions

Configures special functions for lock release.

Installation Functions

Configures special functions for system installation.

IN1 Input Usage

Activation on Closure towards CFP2

Activation in Presence of Voltage