40
EN
7.4 SETUP
This section allows you to configure the device (language, date and
time...)
f Scroll through the menu to the Setup icon and
press to confirm and access the device
setup
SETUP
Wi-Fi reporting unconnected
App registration enable
Date and time settings
Language
Information
Reset
select exitscroll
7.4.1 Wi-Fi reporting unconnected
The monitor provides pop-up notification in the event that there is no
Wi-Fi connection between the monitor and the router.
The lack of Wi-Fi connection will prevent calls from being received on
a smartphone (and, in some types of system, on the monitor too) and
cancels all main functions that can be controlled via the app.
f Select/deselect the function to enable/disable the pop-up
notification
Wi-Fi reporting unconnected
7.4.2 App registration enable
Permits a new user register his/her own smartphone in order to gain
access to monitor functions, or prohibits him/her from doing so.
f Select/deselect the function to enable/disable App registration
App registration enable
7.4.5 Information
This menu provides technical information about the device
(e.g. type of device, versions, addresses, etc.).
SW: beta-1.1.0-devel12
beta-1.1.0-devel4
v1.1.1 devel 10
IP: 172.25.150.74 (255.255.255.0)
SN: 00B06c1915A1
GW: 172.25.150.250
SETUP
exit
select exitscroll
f Press to exit the screen.
7.4.6 Reset
The menu can be used to:
• reset the Wi-Fi parameters by returning the device to access point
mode.
• restore the factory settings of the device by deleting the user and
system configurations.
f Navigate to the desired option, then confirm the selection
or
exit
.
Reset menu
Reset Wi-Fi parameters
Factory reset
select exitscroll select exitscroll
7.4.3 Date and time settings
Allows setting of the device date and time, by selecting your
GMT time difference.
f Navigate to the desired option, then confirm the
selection
or exit .
Date and time setting
GMT O London, Lisbon, Dublin
GMT +2 Athens, Istambul, Cairo
GMT +3 Moscow, Bahrain, Kuwait
GMT +3.30 Tehran
GMT +4 Abu Dhabi, Muscat, Baku
GMT +1 Paris, Zurich, Rome
select exitscroll
7.4.4 Language
Used to set the device language.
f Navigate to the desired option, then confirm the selection
or
exit .
Language
Italiano
Français
Español
Português
Deutsch
English
select exitscroll select exitscroll
7.4.7 Update product
Select the option “Update product” to install the latest SW version available.
To Next Page
Loading...
Need help?
General
