Need help?Do you have a question about the Comelit IPCAM720A and is the answer not in the manual?
Details on connecting the camera to the network and inserting a Micro SD card.
Instructions for connecting the DC 12V power adapter and Ethernet cable.
Explains Zero Configuration Networking for NVR and COMELIT RAS Solution integration.
Guides on using the SmartManager utility to assign IP addresses to cameras.
Steps to access camera functions through a web browser interface.
Procedure to reset IPCAM720A and IPCAM700A models to factory defaults.
Procedure to reset IPCAM722A and IPCAM702A models to factory defaults.
Procedure to reset IPCAM727A model to factory defaults.
Details on connecting the camera to the network and inserting a Micro SD card.
Instructions for connecting the DC 12V power adapter and Ethernet cable.
Explains Zero Configuration Networking for NVR and COMELIT RAS Solution integration.
Guides on using the SmartManager utility to assign IP addresses to cameras.
Steps to access camera functions through a web browser interface.
Procedure to reset IPCAM720A and IPCAM700A models to factory defaults.
Procedure to reset IPCAM722A and IPCAM702A models to factory defaults.
Procedure to reset IPCAM727A model to factory defaults.
General| Night Vision | Yes |
|---|---|
| Ingress Protection | IP66 |
| Weight | 300g |
| Power Supply | 12VDC |
| Supported Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTSP, SMTP, NTP |
| Compression | H.264 |
| Operating Temperature | +50°C |
To Next Page
