Comelit IPCAM720A - Installation; Hardware Connection

1. INSTALLATION
1
Connecting to the Network
Micro SD memory slot
Hardware Connection
Connect a standard RJ-45 cable to the network port of the Camera. Generally a
cross-over cable is used for directly connection to PC, while a direct cable is used for
connection to a hub/switch
Insert the Micro SD memory card up to 32GB.
[IPCAM720A] [IPCAM722A]
[IPCAM727A][IPCAM702A]
[IPCAM700A]
SD memory card
Micro SD
card slot
SD memory card
SD memory card