To Next PageTo Next Page
Need help?Do you have a question about the Comelit KCA2061A and is the answer not in the manual?
General| Brand | Comelit |
|---|---|
| Model | KCA2061A |
| Category | Intercom System |
| Language | English |
Guidelines for safe use, installation by qualified personnel, and power handling.
Information on cleaning procedures and authorized repair services.
Details on default apartment call addresses and initial setup.
Instructions on adjusting the S1 switch based on installed buttons.
Procedure to set the S1 switch according to the number of buttons.
Illustrated guide for assembling the CA2100A unit.
Instructions for adjusting LED brightness and speaker volume.
Guidance on replacing nameplates on the unit.
Quick programming of buttons with sequential addresses.
Programming individual, non-sequential apartment addresses.
Illustrated steps for installing and wiring the 2738W/A unit.
Details on the ringtone volume selector and silent mode indicator.
Information on the optional card for extra button and call repetition.
Notes on omnipolar switch, power disconnection, and ventilation.
Procedure for setting apartment addresses on the 2738W/A unit.
Comprehensive table mapping DIP switch settings to apartment addresses.
Illustrative example of setting a specific apartment address.
Maximum cable lengths based on cable type and system configuration.
Guidance on UTP cable connection and required color coding.
Diagram showing wiring for a typical kit setup.
Explanation of the local door-opener button functionality.
Details on floor call operation and cable requirements.
Wiring diagrams for systems with multiple entrance panels or units.
Procedure to activate relays using the P1 button on the indoor unit.
Configuration steps for JP1 and S2 DIP switches for relay control.
