Need help?Do you have a question about the Comelit MT/VCS/01 and is the answer not in the manual?
General| Brand | Comelit |
|---|---|
| Model | MT/VCS/01 |
| Category | Intercom System |
| Language | English |
Describes system usage restrictions like no intercom or distance limits.
Details about external units like Logicom modular, Unicom semi-modular.
Describes internal monitors like Eurocom and their mounting options.
Technical details of Logicom modular entrance panels, materials, and colors.
Details about flush mounted boxes for 1-2-3 modules, including dimensions.
Information on module-holder frames for 1-2-3 modules and their dimensions.
Describes rain shields used to protect flush-mounted external units from rain.
Frames used to hide wall imperfections around flush-mounted boxes.
Surface-mounted housings for rain protection, fixed directly to the wall.
Describes a module designed solely for housing the speaker unit.
Modules with 1 or 2 push-buttons, including a nameplate illumination lamp.
Modules featuring 4 or 6 push-buttons, complete with nameplate illumination lamps.
A module used to occupy empty slots at minimal cost.
A module designed for housing the PTT key.
Module for signals like building numbers or busy status, with illumination.
Digital electronic key module with programmable codes for relay activation.
Identical to previous, but with 2 codes for activating 2 different devices.
Module for access control recognizing special keys resistant to maltreatment.
Module featuring an infrared movement sensor with a twilight activation switch.
Proximity reader module for recognizing programmed electronic keys.
Electronic key reader module with proximity badge, compliant with French PTT standard.
Module with devices for automatic call/audio selection and other signals.
Explains the terminal board connections for a specific module.
Entrance panel with letter box, designed for 2 Logicom modules.
Similar to above, but with rear opening.
Entrance panel for 3 modules, with front/rear opening and rain shield.
Rain shield for specific entrance panels.
Modules with B/W TV camera, speaker unit, and illuminated call buttons.
Explains the terminal board connections for a 2 push-button audio-video module.
Modules featuring colour TV cameras, speaker units, and call buttons.
Speaker unit for Logicom and Unicom entrance panels.
Panels for audio-video or push buttons, with various button counts.
Extruded aluminium boxes for Unicom panels, with options for multiple boxes.
Base units for surface-mounted Unicom panels, requiring brackets for completion.
Galvanized sheet steel flush-mounted boxes for Vandalcom panels, with spacers.
Die-cast aluminium frames for Vandalcom panels, painted for outdoor use.
Modules pre-equipped for housing the audio speaker unit and requiring an additional art. 1137.
Module with 4 push-buttons, nameplate illumination, and lamp holder.
Details the Eurocom monitors, their features, and optional cards.
Explains the connection terminals on the bracket for Eurocom monitors.
Guide for installing semi flush-mounted monitors with specific boxes.
Instructions for installing semi flush-mounted monitors with a wall spacer for surface mounting.
Guide for installing surface-mounted monitors with flat screens.
Step-by-step guide on how to detach a monitor from its mounting.
Description of a semi flush-mounted Eurocom monitor with B/W screen and electronic call.
Another semi flush-mounted monitor, specifically for use with box art. 4514.
Describes a surface-mounted Eurocom monitor with a flat screen.
Details a surface-mounted Eurocom monitor featuring a colour LCD screen.
Monitor with integrated memovideo function for storing images, date, and time.
A card providing conversation privacy when inserted into the wall fixing bracket.
A card with a relay for repeating calls, inserted into the wall fixing bracket.
Flush-mounted box specifically for Eurocom monitors art. 4600W and 4600W/I.
Card with electronic buzzer and 3 supplementary push-buttons, allowing N.C./N.O. state selection.
Card with 3 supplementary push-buttons, without buzzer, allowing N.C./N.O. state selection.
Spacer to convert flush-mounted monitors to surface-mounted versions.
Bracket required for all Eurocom monitors, for both flush and surface mounting.
Base to convert Eurocom monitors to desk versions, includes cable and boss.
Card with 3 signalling LEDs for monitor installation, excluding art. 4609W.
Illustrates the installation of specific accessories.
Describes a wall telephone with electronic call, conversation button, and supplementary push-button.
A desk base for Okay telephones, allowing conversion of wall models to desk versions.
A buzzer to be inserted into telephones for a different call sound.
Card with relay for call repetition, inserted into the telephone.
Card to adjust the call volume of the telephone.
Card for adjusting call volume and providing conversation privacy.
Transformer for audio circuit power supply, with primary and secondary windings.
Relay for call repetition and general services, with capacity and terminal description.
Similar to previous relay but with an added switching device.
Device for automatic video and audio switching for systems with multiple external units.
Timer adjustable for electric lock control of permanent active mechanisms.
Transformer for central video unit power supply, with specifications.
Transformer for powering supplementary bells, with specifications.
Power supply for supplementary monitors, featuring a relay and high output current.
Stand-by power supply with battery for audio and electric lock operation during power outages.
Stand-by power supply for video circuits, operating during temporary power cuts.
Decoder for video signals from remote cameras connected to push-button panels.
Amplifier for distributing video signals to multiple monitors, with impedance matching.
Central power supply unit for video door entry systems, providing timed power and protection.
Details camera power supply voltage and LED indicators.
Describes monitor power supply voltage, LED indicators, and timer reset.
Device for automatic video and audio switching between inputs, with removable terminals.
Explains the terminal board connections for the switching device.
Advises on routing conductors and specifies conductor cross-sections based on distance.
Explains how to transport the video signal using twisted pair conductors and distribution amplifiers.
Provides important safety warnings for users regarding monitor operation and maintenance.
States that products comply with relevant European Directives and bear the CE mark.
Information on contacting Comelit Group for technical assistance and product updates.
Lists potential audio and video faults for all system types and their remedies.
Lists potential audio and video faults for all system types and their remedies.
Details common audio faults and their probable causes and remedies.
Lists common video faults, their likely causes, and solutions.
Addresses issues specific to systems with multiple external units and their potential faults.
Explains the fundamental steps of system operation, from call to conversation.
Provides general notes relevant to all system installations, including wiring and component compatibility.
Details the basic video system setup using Logicom panels and simplified wiring.
Explains the basic video system setup with Unicom panels and simplified wiring.
Describes the system with two Logicom audio-video external units and simplified cabling.
To Next Page