Comelit PL8461V - Programming via MyComelit App

37
PROGRAMMING VIA MYCOMELIT APP
√ Update the MyComelit App to the latest available version.
The MyComelit app can be used to program the door entry monitor quickly and easily, even while it is switched
off.
The MyComelit app makes it possible to:
• Read all door entry monitor programming.
• Edit and rewrite the programming.
• Create programming oine, save it to your smartphone and then write it on the door entry monitor later.
• Create and save your favourite programming to your smartphone.
• Increase the user code by a configurable value to allow the programming of door entry monitors in
sequence.
• Copy the programming of one door entry monitor to another door entry monitor.
• Share the door entry monitor programming with other users (via WhatsApp, etc.) to facilitate technical
support.
• …
In addition to these functions, the MyComelit app can also be used for the following functions:
• To program the user code (only if it has not been programmed using the DIP-switches, see Programming
the user code via the MyComelit app on page 28).
• To program the functions to be associated with the buttons.
• To program the door entry monitor as main/secondary (see Main and Secondary Door Entry Monitor on
page 38).
• To change the ringtones for:
• Call from external entrance panel.
• Floor door call (CFP)
• Intercom call.
• Call with range.
• To change the functions associated with the CFP input (see Functions associated with the CFP input on
page 39).
• To program the following functions:
• Intercom (see Intercom on page 38).
• Selective intercom (see Selective intercom on page 38).
• Selective group intercom (see Selective group intercom on page 39).
• To authorise the user to utilise the following functions:
• “Door opening upon call” (see Door opening on call on page 23).
• “Automatic answer” (see Automatic answer on page 23).
• To program the minimum and maximum call codes for the call range function (see Call range on page
39).
• To disable the user and/or installer menu on the door entry monitor.
• Disable the “Silent Mode” button or select the ringtones to silence.
• To restore the door entry monitor to its factory programming.
| Table of contents |