Comer E21 - 3 Electric Sawsdescription; Ec Plate

13
ORIGINAL INSTRUCTIONS
3 ELECTRIC SAWS DESCRIPTION
Make sure that the plates and the adhesive pictograms are perfectly readable.
Otherwise, apply new ones after requesting them to Breaker S.r.l.
3.1 EC plate
In the identification label applied on the electric chain saws E21 - E23 the following
data are provided (see Fig. 1):
 Business name and address of the manufacturer,
 CE marking,
 Power supply parameters (power, voltage, current, frequency),
 Reduction unit output RPM,
 Type/Model identification,
 Serial number,
 Year of construction,
 Maximum cutting length, chain direction and speed,
 Trademark,
 Double insulation motor.
Figure 1 – Identification label of the electric chain saws E21 – E23.
The Declaration of conformity is provided together with the machine.