18
ORIGINAL INSTRUCTIONS
3.5 Conditions of use and environment provided
3.5.1 Intended use
As previously mentioned, the electric chain saws E21 – E23 were designed and
manufactured for cutting light construction materials, such as Poroton, Alveolater,
Gasbeton, Ytong, Siporex, Eraclit, tuffs, expanded cellular concrete.
Each unauthorized modification may jeopardize the safety and the proper
operation of the electric saws and may lead to a serious accident.
Other types of employment, or the expansion of use beyond that intended, do
not match the target attributed by the manufacturer and therefore the same
cannot assume any liability for any resulting damage.
3.5.2 Usage environment
The electric chain saws E21 – E23 must be used in indoor settings only, such as
buildings under construction, houses, shipyards or in outside areas in the absence of
adverse weather conditions (rain, hail, snow, strong wind, high humidity, etc.).
Do not use the electric saw in case of low visibility or in the dark.
Maximum permissible temperature: +40° C
Minimum permissible temperature: +0° C
Maximum permissible humidity: 80%
Never use the electric saw in the rain and in high
humidity conditions.
Immediately disconnect the plug if the cable is
damaged or cut.
Prohibited environments of use
The electric chain saws E21 – E23 should not be used:
in areas prone to risk of fire or explosion;
in environments with corrosive and/or chemically active atmosphere;
in dimly lit environments;
in unprotected outside areas in rainfall.
To Next Page
Loading...