Comer E21 - Pictograms and Safety Signals

14
ORIGINAL INSTRUCTIONS
3.2 Pictograms and safety signals
The pictograms below, placed on the machine, indicate the operations to be carried
out before and during the use of the machine, the compulsory use of Personal
Protective Equipment (PPE) and the obligation of disposal at end-of-life (see Fig. 2).
 Wear ear muffs and safety goggles.
 Read this instructions manual before using the machine.
 Dispose of waste according at end-of-life, in accordance with the law provisions.
 WARNING:
Do not use the chain saw if you have not previously checked the oil tank.
Recommended oil: COMER E20, specific for chains.
 Guaranteed sound power level L
WA
: 110 dB.
 Chain rotation direction. Maximum cutting length.
Never use the electric saw in the rain and in high humidity conditions.
Immediately disconnect the plug if the cable is damaged or cut.
 IMPORTANT:
To avoid vibrations and an excessive stretch of the chain, keep the machine
always pressed on the cut surface and resting by the side of the material.
 SAFETY DEVICE:
In the event of a kickback, the hand guard triggers the chain brake device and
stops the machine. Before a new commissioning, press the red lever.