Using the electric saw with just one hand and not both (the right hand on the
rear handle while the left one on the front handle).
Keeping the chain of the electric saw towards yourselves or another person.
Keeping the electric saw above the height of your shoulders.
Begin cutting without first actioning the chain or using the sawtooth as a
support point.
Begin cutting with the bar tip.
Using the electric saw to cut hard materials, such as concrete elements,
precast elements and similar.
Using the electric saw to cut wood, logs or similar materials.
Using the electric saw while standing in a seemingly precarious balance or in
an unstable and insecure position.
Supplying the electric saw with a voltage and a frequency that are different
from those indicated on the identification label.
Using damaged, bare and/or non-compliant extension cables, plugs and
sockets.
Mounting the bar and the chain of the electric saw without first connecting
the plug to the power supply.
Perform any maintenance, cleaning and lubrication procedures on the
electric saw without first disconnecting the plug from the power supply.
To Next Page
Loading...
