19
English
above the maximum permitted values. The pressure value can be read on the indicator (25).
• Spray gun lever lock device.
Safety stop (16) which allows locking the lever (17) of the spray gun (13) in closed position,
thus preventing accidental operation (FIG. 5, REFERENCE “S”).
STANDARD FITTINGS
Make sure the following are inside the pack of the product you have purchased:
• high pressure cleaner;
• high pressure delivery hose with quick-t coupling;
• spray gun;
• lance hose;
• water inlet quick-t coupling with seal;
• master switch knob;
• 4 plugs for wall xing;
• instruction manual - safety warnings;
• instruction manual - use and maintenance;
• warranty certicate;
• booklet giving the assistance centres;
• EC declaration of conformity;
• nozzle cleaning pin.
If any problems arise please contact a Specialized Technician.
OPTIONAL ACCESSORIES
You can add the following range of accessories to the standard ones supplied with your machine:
• water mains disconnector: designed to comply with the standards in force as far as connecting
up to the drinking water mains is concerned.
• sandblasting lance: designed to smooth surfaces, removing rust, paint, encrustations, etc.;
• drain cleaning kit: designed to unclog pipes and ducts;
• rotating nozzle: designed for removing resistant dirt;
• foam lance: designed for a more ecient distribution of the detergent;
• rotating brush: designed for a gentle, yet eective, cleaning on large surfaces such as vehicle
bodywork;
• oor cleaning lance: designed for cleaning large tiled or other oors.
• hose reel: to increase working range thanks to a longer hose and practical housing for it;
• dierent types of lances and nozzles.
INSTALLATION - ASSEMBLING THE ACCESSORIES
• Screw up the connection (21) of the high pressure hose to the connection (19) of the spray gun(13)
and tighten well using two 22 mm/0.87 in spanners (not supplied). OperationCinFig.7.
EN
To Next Page
Loading...
Need help?
General
