EasyManua.ls Logo

Comfee Easy Dry 16 - Troubleshooting

Comfee Easy Dry 16
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
TROUBLESHOOTING
Problem What to check
Unit does not start
Make sure the dehumidifier s plug is pushed completely into the outlet.
Check the house fuse/circuit breaker box.
Dehumidifier has reached its preset level or bucket is full.
Water bucket is not in the proper position.
The air filter is clogged.
The unit is tilted instead of upright as it should be.
The floor surface is not level.
Hose to connector or hose connection may be loose.
Intend to use the bucket to collect water, but the back drain plug
is removed.
This is normal. The dehumidifier has Auto defrost feature.
Dehumidifier does not
dry the air as it should
The unit makes a loud
noise when operating
Frost appears on the coils
Water on floor
ES, AS,P2,Eb appear in
the display
Before calling for service, review the chart below first yourself.
These are error codes and protection codes. See the CONTROL PADS
ON THE DEHUMIDIFIER section.
Did not allow enough time to remove the moisture.
Make sure there are no curtains, blinds or furniture blocking the front or
back of the dehumidifier.
The humidity control may not be set low enough.
Check that all doors, windows and other openings are securely closed.
Room temperature is too low , below 5°C(41°F).
There is a kerosene heater or something giving o water vapor in the room.
EN

Table of Contents

Related product manuals