13
7. Rotate the pot two to three times to ensure a solid contact
between the bottom of the cooking pot and the heating
plate.
a
a Cooking Pot
8. Close the lid, and then press downward until it clicks into
place.
9. Plug the power supply cord into a grounded 3 prong
electrical outlet.
NOTE: The rice cooker is powered ON, but in standby
mode (no heat).
10. Select desired cooking program. See “CONTROLS” for
explanation of options.
11. Press ON/OFF/START.
NOTE: During rst use, there may be a plastic odor which
will dissipate after using.
12. When cooking is completed three beeps will sound. The
Keep Warm/Reheat light will illuminate.
13. Press the lid release button to open the lid, and then stir
the rice well before serving.
COOKING OTHER MEALS
The rice cooker offers a wide variety of cooking programs to
help create perfect dishes in a single pot.
WARNING - ELECTRICAL SHOCK HAZARD
•
Plug into a grounded 3 prong outlet.
•
Do not remove the ground prong from the power cord
plug.
•
Do not use an adapter.
•
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
NOTE: Cooking time will vary depending on the type of dish
being cooked.
1. Before using for the rst time, wash the cooking pot, inner
lid, steam vent, other accessories and attachments, and
then dry each thoroughly.
NOTE: The cooking pot is dishwasher safe.
2. Add desired ingredients to the cooking pot.
3. Place the cooking pot into the rice cooker.
4. Close the lid, and then press downward until it clicks into
place.
5. Plug the power supply cord into a grounded 3 prong
electrical outlet.
NOTE: The rice cooker is powered ON, but in standby
mode (no heat).
6. Select desired cooking program. See “CONTROLS” for
explanation of options.
7. Press ON/OFF/START.
To Next Page
Loading...
Need help?
General
