6-2. INFORMATION(product information)
In MENU mode, move to INFORMATION and check out Product Information
(1) MODEL : Product Name
(2) VERSION : Product Version
(3) HOME ID : Currently set Buil
ding No. & Household No.
(4) TOUCH : Touch program Version
6-3. EXIT
1) When paging the household
●
Enter the household number you want to cal.1
ex) household 101
⇒
1, 0, 1
●
Household number appears on FND
●
Press the Call button (E)
●
Conversation begins when they answer.
2) When paging guard station
●
Press the guard button
●
‘gUAd’appears on FND
●
Press the Call button (E)
●
Emit call house along with flickering of ‘gUAd’.
●
Conversation begins when guard station answers.
3) Opening the door with RF card
●
Press the Household number
●
Press the Key button (K)
●
Letters of ‘PASS’ flicker on the FND.
●
Press the 4-digit password.
●
Appears ‘----’ on the FND.
●
Press the Call button
●
Door is open with flickering of ‘oPEn’ on FND .
[Reference for use]
Contact guard station or management station if you
don’t remember the password
Wait for a reply
Press the page button.
A paging tone will sound.
Press the
Call button (E).
Enter theHousehold Number.
ex) unit 101
Enter the Household Number.
Press the Electronic key button.
ex) To open the door of unit 101
Press the Guard button.
Press the Page button.
A paging tone will sound.
Wait for a reply
Press the Call button (E).
Enter the Household PIN.
Press the Page button.
Press the Call button (E).
Please the Card Here
OPEN DOOR
4) Opening the door with registered RF card (optional function)
●
Put the RF card on the sensor positioned right below of
camera lens to open the door. Door will be opened along
with a message of ‘oPEn’ on FND.
[Reference for use]
1. If you try to open the door with unregistered RF
card, it will be notified to guard station. Please
try again after registering it at the guard station
or management office.
2. If RF card still doesn’t work after proper
registering procedure, it is not usable card.
7.
11
To Next Page
Loading...
Need help?
General
