10
6.
You can set HOME SET(Household information setting) and INFORMATION(Product
information check) after pressing menu button for 3 seconds in stand by mode.
6-1. HOME SET (Household information entry)
Move to HOME SET from System setting mode and select below
(1) HOME ID : Setting Building No. and Household No
※ How to set
① Move to HOME ID from HOME SET and select
② After selecting the number with ▶ / ◀, press the SELECT button and fill it in from
first. : Default on household no is 8 digit numbers. Blanks are marked with 0.
(ex : Building no : 101 Household no : 1 (0101 - 0001)
※ Wrong number can be modified with ◁ button.
③ When finish inputting 8-digit number, press the select button to save it.
(2) PASSWORD :Setting Household Password
※ How to set
① Move to PASSWORD section from HOME SET and select below
② Enter numerical numbers by using moving button (Initial building/household No. are
set “1234”. You should change password to use)
※ Warning : For security reason, do not use repeated No
※ Numbers such as 0000, 1234, 4321 are prohibited to use for security reason
(3) LOBBY ID : Set Lobby entrance ID to monitor
※ How to set
① Move to LOBBY ID section from HOME SET and select below
② Enter numerical numbers out of 01~39 by using moving button
(Initial Lobby entrance ID No. is set “01”)
③ Complete setting by pressing “select” button
EXIT : Go back to system setting
To Next Page
Loading...
Need help?
General
