7
•After Menu screen appears, you can change setting with below 4 buttons
Menu start and finish :[ ] (Menu button -‘[ ] ’)
SELECT : [ ] (Guard button-‘[ ] ’)
Move upward /move right : [ ] (Door release button –‘▲’ / ‘▶’)
Move downward /move left : [ ] ( Monitor button–‘▼’ / ‘◀’)
After pressing MENU button in Video call or monitoring mode, you can change
settings for DOOR(LOBBY), VIDEO SET(BRIGHTNESS / CONTRAST/
COLOR), UTILITY (ADDITIONAL FUNCTION) and INFORMATION (product
information)
5-1. Display setting
DOOR(LOBBY) VIDEO SET (BRIGHTNESS / CONTRAST/ COLOR control
function).
After moving to menu with MENU button, press SELECT button to move to the
menu below.
(you can control LOBBY VIDEO
SET while you are talking with lobby.)
(1) BRIGHTNESS : control BRIGHTNESS
(2) CONTRAST : control CONTRAST
(3) COLOR : control COLOR
You can control from 0 to 20 level. Initial level is set for level 10
※ how to set
After moving to menu with your desired MENU from ‘DOOR VIDEO SET’,
press SELECT button to move to the menu below
(you can control ‘LOBBY VIDEO SET’ while you are talking with lobby.)
(4) RESET: reset display setting
※ how to set
.
To Next Page
Loading...
Need help?
General
