3.
Part names and functions
4
MonitorHandset
Power LED
Monitor Button
Guard Button
Door Open Button
Menu Button
Power Switch
4-1.
Call from the individual entrance
① When the visitor presses the call button, an electronic chime sound rings and the
v
isitor’s image appears on the monitor.
② By picking up the handset, you can talk with the visitor. If you press door release
button, door will be released.
(
Door release works only while talking and it is possible only when the door camera
is interlocked with door release function.)
③ When you receive the call from (Lobby / Guard Station) during the conversation
with the individual entrance, the electronic chime sound rings. Then, press the
(Lobby: monitoring button / Guard Station: guard button) from t
he video phone
to finish the conversation with the individual entrance and have a conversation
with (Lobby / Guard Station).
④ Screen will be turned off after 60 sec automatically, press the monitoring button to
c
heck again.
⑤ If you put down the handset, talking is finished and turns to stand-by mode.
.
※
Caution : When you are holding the handset while the hook switch is off and
someone may push the button of camera, you may lose your hearing
because of high volume of calling sound.
To Next Page
Loading...
Need help?
General
