5
4-2. Call from the Lobby
① Visitor’s image will be shown on the monitor with emitting chime sound when a
visitor presses the call button.
②
By picking up the handset, you can talk with the visitor.
(Screen will be turned off after 60 sec automatically from the b
eginning of
conversation)
③ When you receive the call from individual entrance during the conversation with
Lobby , the electronic chime sound rings. Then, press the monitoring button from
the video phone to finish the conversation with lobby and have a conversation
with visitor.
④ When you press the door release button in the middle of conversation, the lobby
gate will be opened with switchgear sound and the conversation will be finished.
4-3. Conversation with Guard
(1) Call from the guard
① The sound of call will be emitted when it has a call from guard.
② By picking up the handset, you can talk with the guard.
③ If there is a call from door while you are communicating to a person at guard
station, it chimes and the image of visitors is shown. Then, press the
monitoring
button from the video phone to finish the conversation with guard
and have a conversation with visitor
(2) Calling the guard station
① You can talk with guard station by picking up the handset and pressing guard call
button.
② Conversation will begin when a guard station responds.
To Next Page
Loading...
Need help?
General
