Commax CCU-310EV User Manual

8
Λ Setting target household’s building No., room No. and SUB No. from guard station.
Ȅ SUB number is the port number of CCU-310EV for elevator call.
Press the expansion button and enter the SUB number.
Ex) Building 101 Room 101 Port 1
1> Calling guard station by CCU-310EV ID_SET button.
2> From guard station (During calling)
“Remote” button Î “101”(building No.) Î “ ミ ” Î “101”(Room No.) Î Extension button
Î “0”(SUB No.) Î “#” Î Call end
Ȅ SUB Number : - SUB number is a port number that such household will use for EL calling.
- SUB number can be set from “0” to “9”.
*
SUB number “0” ~ “9” means CCU-310EV’s “PORT_1” ~ “ PORT_10” numbers.
※ Household input mode must be registered individually for each household.
(“Sub 0” Î “Port_1” ..... Î “ Sub 9 Î “Port_10”)

Commax CCU-310EV Specifications

General

Model Name Spec.	CCU-310EV
Wiring	481 DATA : 2 lines (Polarity) / E/V connection : 2 lines (Non-polarity) RS-485 : 3 lines (Polarity)
Distance	1Km (Pie 0.65 wire basis)
Voltage	DC 12V / 1A
Power Consumption	Standby : 55mA / Operation : 70mA
Operating Temp.	0~+40℃