Commax CDV-70P - Product Settings and Features; Display Settings; Utility Features

6
On talking or monitoring mode, press menu button on the right side of product, and
press △/▽ buttons to adjust display(brightness, contrast, color), to enter the Utility
menu, to check the product information.
•Following 4 buttons on the right side of the product are used for setting.
* Menu, End : MENU
* Move up, right : △
(UP Button)
* Select, Input : SELECT * Move down, left : ▽
(DOWN Button)
4-1. Display Setting (Brightness, Contrast, Color Adjustment)
On Setting Mode, move to Door Video Set and press Select button to enter the display
setting mode.
(1) BRIGHTNESS : To adjust brightness.
(2) CONTRAST : To adjust contrast.
(3) COLOR : To adjust color.
※ How to adjust
① On DOOR VIDEO SET display press △/▽ to move to the item you want to adjust
② Press Select Button to select the item.
③ Adjust using △/▽ buttons.
④ Press Select Button again to finish.
(4) RESET : Puts back settings to initial setting.
※ How to reset.
① On DOOR VIDEO SET display move to RESET item.
② Press SELECT Button to select the item.
③ Select YES using △/▽ buttons.
④ Press SELECT button to reset.
(5) EXIT : Return to Configuration mode
※ Setting
① Click △/▽ button to move to EXIT in DOOR VIDEO SET menu
② Click SELECT button
4-2. UTILITY(Extra features)
Move to UTILITY and click SELECT button to enter below menu
(1) CHIME-BELL MUTE : Set call sound mute function
① Move to UTILITY from configuration mode and click SELECT. Then, move to
CHIME-BELL MUTE using △ /▽ button
4. Settings
www.bezpeka-shop.com