10
Receiving a call from an individual entrance
1) When paged from an entrance, the touch panel rings and displays the visitor.
2) To receive a call, touch (Call) button. To reject a call, touch (Cancel) button.
3) To hang up a call, touch (End call) button.
Switching channel from an individual entrance to the other.
1) While monitoring an entrance touch (Switch channel) button.
2) The current monitoring channel will be switched to the other entrance.
Using Call log
1) Touch button to make a call from Call log.
2) Touch (Other options) button and touch ‘Delete’ button to delete the call log selected.
※ Up to 500 call logs can be stored and the automatic overwriting starts from the oldest log
information.
5.1.3. Call log
Call log, Call type, Make a call from Call log
Call log display
Individual entrance image display setting
To Next Page
Loading...
