To Next PageTo Next Page
Need help?Do you have a question about the Commax TP-90RN and is the answer not in the manual?
General| Brand | Commax |
|---|---|
| Model | TP-90RN |
| Category | Intercom System |
| Language | English |
Details the physical controls and their functions on the intercom unit, including handset, buttons, and displays.
Describes the simple 10-wire connection system for easy installation and cost savings.
Details the system's capacity for up to 90 stations for versatile use in various environments.
Explains the availability of 3 independent intercom channels and the 'Follow Me' call transfer function.
Describes the indicator that informs callers of user absence and rejects incoming calls.
Notes the capability for multiple stations to share the same station number for convenience.
Explains the use of the speaker button for making calls without lifting the handset.
Covers dividing stations into four groups for paging, call transfer, and call answering.
Describes the LED display showing the caller's station number on the receiving unit.
Explains the meaning of indicators like FU (full channels) and PF (paging) on the LED screen.
Details how the system informs users if a called station is engaged or non-existent.
Details basic call functions, busy tones, and call initiation procedures for making calls.
Explains how to place a call on hold and resume the conversation using the hold button.
Describes setting up conference calls with up to three stations using the transfer function.
Outlines the two paging options: all stations or group paging for announcements.
Explains how to page all stations using the handset or a specific number.
Details how to page specific groups of stations using transmit numbers from Table 1.
Describes how to disable receiving pages for a station by adjusting a dip switch.
Explains assigning one station to answer all incoming calls within a group.
Explains diverting engaged calls to another station within the same group.
Details setting an absence message for the caller's LED screen when unattended.
Describes how to adjust the volume levels (low, mid, max) in standby mode.
Shows examples of setting station IDs using DIP switches to receive pages.
Details the BUS type wiring, power adapter requirements, and cable distance limits.
Lists key technical specifications including power source, wiring, distance, and dimensions.
