13
5.1.2. Guard station
Calling a guard station
Calling a guard station
1) To call a guard station, touch ‘Guard station’ icon or touch ‘Guard station’
button in dialing mode
2) To hang up a call, touch ‘End call’ button.
Receiving a call from a guard station
1) When the call is received from a guard station, the touch panel rings and
displays a guard station icon on the screen.
2) To receive a call, touch (Call) button. To reject a call, touch ‘Cancel’
button.
3) To hang up a call, touch ‘End call’ button.
※ Security office and management office cannot see the user’s image.
※ The guard video call is only available for products with video call cameras
※ If you use the call transfer function during the guard station call, the guard
station call is automatically terminated
※ Setting of security office -> Connect to COMMAX and control -> setting to
number -> Security and management office can be settled.
Call switching function
1) If someone calls you during a calling, it will be displayed on the screen.
2) Touch (Switch call) button to answer the call. The previous call is
disconnected as you switch the call
※ Some devices do not provide CID functionality (Caller ID).
※ Call transfer is not supported on some calls
To Next Page
Loading...
Need help?
General
