Commencal FCB - Page 13

!
ASSEMBLY
ASSEMBLY STEPS
STEP 7
FOX 40
1) Unscrew
the four
security bolts.
Remove and
grease the
axle.
STEP7
BOXXER
1) Unscrew
and remove
the axle.
Install the front
wheel into the
fork. Grease
and install the
axle.
2) Install the
front wheel
into the fork.
Install the axle
and tighten.
Tighten the
four security
bolts.
2) Tighten the
axle bolt (1).
Then tighten
the pinch bolt
(2).
The detail information for assembly of the
axle is written on the axle body.
Refer to the Rockshox manual for precise torque
instruccions.
COMMENCAL / P.14