Commencal FCB - Page 14

ASSEMBLY
ASSEMBLY STEPS
STEP 7
9MM AXLE
1) Install the
front wheel
into the fork,
make sure to
include the
alignment
spacer.
3) Close the
lever half way
and tighten
the axle nut
by hand.
2) Install the
quick release
axle in the
open position.
Don’t forget
the security
rings if
provided.
4) Fully close
the lever
vertically,
you should
feel some
force. Ensure
your wheel is
sufciently
tight with
no play. If
not, repeate
the previous
steps.
!
Make sure when you tighten the wheel, the
hub is sat correctly in the fork.
COMMENCAL / P.15