54 ENGLISH
Starting up the robot vacuum cleaner
Charging the battery
Before using the robot vacuum cleaner for the rst time, it must
be fully charged:
1. Place the charging station against a wall.
2. Remove all obstacles within 0.5 m to the sides and 1.5 m in
front of the charging station.
3. Connect the cable of the power adapter to the charging
station. Stow any excess cable in the compartment on the
underside of the charging station.
4. Connect the power adapter to a suitable wall socket (100 –
240 V ~ 50 – 60 Hz). The LED on the charging station will
light up.
To Next Page
Loading...