64 ENGLISH
Cleaning modes
Standby mode
If you press the power button
on the robot vacuum cleaner
or the remote control during operation, it will switch to standby
mode. Use this function to, for example, empty the dust collector
or rell the water tank. Press the power button
again to resume
operation.
Sleep mode
If the robot vacuum cleaner receives no input for approx. 5 minu
-
tes in standby mode, it will switch to sleep mode.
Press the
button on the robot vacuum cleaner or the remote
control to exit sleep mode.
NOTE!
• After approx. 12 hours in sleep mode, the robot vacuum
cleaner will switch itself o.
• Press the power button
for approx. 3 seconds to switch the
robot vacuum cleaner on or o.
• Pre-programmed idle time: in the period from 10:00 p.m. to
7:00 a.m., it is not possible to put the robot vacuum cleaner
into operation or to save a scheduled time. This function can
be deactivated via the app. You can nd information in the
instruction manual for the app on the "commodore-home.
com" homepage
To Next Page
Loading...