Key functions
Charging the battery
Smart battery life with standard use is approx. 8 hours.
When your battery has 15% remaining, you will receive an alert to charge your terminal.
To save power, receipt printing is disabled once the battery has only 5% remaining. If the battery
reaches 0% your device will power o. Once connected to a wall charger or charging cradle, the
device may take a few minutes before it powers back on.
Charging using a charging cradle
1. Plug the power cable into the port on the side of the Smart terminal charging cradle
2. Plug the power cable into a wall socket
3. Place the Smart terminal on the charging cradle
4. Look for this icon to make sure your Smart terminal is charging
Charging using a USB adaptor
1. Insert USB cable into plug adapter
2. Insert USB adapter into wall socket
3. Insert USB-C end into the USB-C charging port
4. Look for this icon to make sure your Smart terminal is charging
NOTE:You can charge your Smart terminal by plugging the USB cable into another device, for
example, a laptop or desktop computer, however charging will takesignificantlylonger.
23 Commonwealth Bank of Australia | Smart User Guide
To Next Page
Loading...