Key functions
Changing the receipt roll
1. Open the paper roll cover
2. Remove the used paper roll
3. Insert new roll so the paper feeds from the top, leaving a length of paper sticking out of the
terminal
4. Close the printer door, pressing down gently until it clicks shut
TIP: There are small slots located on each side of the paper roll cover. The easiest way to open the
paper roll compartment is to put your thumbnail in one of the slots and push/flick the slot to open
the cover. Order more paper rolls online at commbankstationery.com.au/stationery
22 Commonwealth Bank of Australia | Smart User Guide
To Next Page
Loading...