CommScope ValuLine VHLP Series - Tool Requirements

TOOL REQUIRMENTS
Tools
Page 8 of 30
7722483
EQUIPMENT AND TOOLS
SECTION 3 INSTALLATION
INSTRUCTIONS
Tools Required
Bolt Diameter in MM
M4 M6 M10 M12 M16
Ring and Open spanner (A/F) 10mm 17mm 19mm 24mm
Torque Wrench 2.5 - 95Nm
Sockets (A/F) 10mm 17mm 19mm 24mm
Allen Key (A/F) 3mm 5mm 8mm
General Toolbox