The unit price (Pr, PrA and Prb) is used to calculate the total value of
the quantity dispensed. The unit price can be different on each side of a
dual hose dispenser.
PR or PrA is the unit price for side A of the dispenser.
Prb is the unit price for side B of the dispenser
The unit price can be set at the dispenser or set remotely with the
Compac Dispenser Monitor.
If the unit price is not set Error 3 will be displayed and the
dispenser will not operate.
1. Make sure that the dispenser is idle, with the nozzle in its holster.
2. Press and release the Parameter switch until the required unit price is
displayed. (Pr, PrA or Prb )
3. Enter in the unit price.
Each press of the Parameter switch passes you over a digit
in a setting, making the digit blink. Holding the switch down for more than a
second changes whichever digit is currently displayed. If you want to pass
over a setting without changing any digits, keep pressing and releasing the
switch.
1. Let the menu time out so that the value and quantity amounts are
displayed.
To Next Page
Loading...
Need help?
General
