Compak F8 - SETTINGS; 10.1. WEIGHT SETTINGS

ORIGINAL INSTRUCTIONS | QUALITY PROCESS REF. | V. 09|10|2020 | K07185
23
10. SETTINGS
The grinder settings descriptions are split
into two sections:
• Setting the grinding times for one,
two and three doses.
• Grinding menu settings.
10.1. WEIGHT SETTINGS
The weight settings vary depending on
the working mode, the weight set for 1, 2
and 3 Dose being the same for Preset and
Instant modes and independent for stored
portalters in automatic mode.
The established ranges for correct operation
in Preset and Instant mode are:
Dose 1 5g to 12g
Dose 2 12,01g to 20g
Dose 3 20,01g to 30g
10.1.1 AUTOMATIC MODE
Go to the SETTINGS menu
/ PORTAFILTER SETTINGS / STORE
Portalter / INSERT Portalter / TARING
... / Progr.X .. / WEIGHT ---.- g /
; using
the +/- buttons to increase or decrease
the dose. Conrm with
/ PROGR. X
STORED / REMOVE Portalter.
If you want to delete any of the previously
saved portalters:
SETTINGS / PORTAFILTER SETTINGS /
DELETE Portalter / PASSWORD: 0000 /
DELETE HOLDER MEMORIES
1, 2, 3. /
.
10.1.2 PRESET MODE
Go to the menu SETTINGS / WEIGHT
SETTINGS / DOSE WEIGHT 1, 2 OR 3 / OK /
DOSE X WEIGHT --.- g /
TO CONFIRM.
Or from the idle screen, press the dose you
want to set and within 2 seconds, press the
icon
/ DOSE X WEIGHT --.- g / TO
CONFIRM
.
10.1.2 INSTANT MODE
Go to the menu SETTINGS / WEIGHT
SETTINGS / DOSE WEIGHT 1, 2 OR 3 /
/ DOSE X WEIGHT --.- g / TO
CONFIRM.
*In this mode the weight setting cannot be
done from the idle screen.