Description
PROC-CAL/002/03
This coffee grinder has been designed using the latest computer and engineering
technology. The result is a high quality product offering exceptional grinding and
dispensing capabilities. It has been manufactured using high quality materials (aluminum,
steel, etc.) ideal for use with foodstuffs. For optimal operation of the grinder described
in this manual, maximum work duty cycles should be:
2.1. The purpose of this manual is to provide the necessary information for the
correct installation, handling and maintenance of the machine, and to emphasize
the precautions that should be taken into consideration by the operator. To ensure
the best use of the coffee grinder, it is essential to carefully follow the instructions
included in this manual. In the event of a problem, please contact your local technical
service. The manual should be kept until the machine is changed and should always
be available to the operator.
2.2. Different terms are used in the manual, such as:
– Characters in bold type, to emphasize importance.
– Numbers in brackets following a word, to indicate the position of the item shown
in the adjoining drawing or external compo-nents diagram.
Example:(1) Hopper lid.
- Icons (information,warning)
Instruction manual
1
2
V.12/2008
K-6 Silenzio / K-6 Professional Barista / K-8 / K-8 Silenzio / K-10 Conic
K-10 Conic WBC
WORK STOP
10 min.
3 min.
5 min.
5 min.
CYCLE
MODEL
information warning
!
i
ENGLISH
MODEL
SERIAL NUMBER
ELECTRICAL DATA DATE OF MANUFACTURE
OPTIONS
TEL.: FAX:
Identification
3
The following information is
printed indelibly on the technical
features plate:
NOTE: The manufacturer
reserves the right to modify
the components of the
machine according to the
requirements of specific
markets or due to the results
of technological advances.
i
To Next Page
Loading...
