5-22 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM
Part Number: 177845-001 File name: CH05.doc
3. Lift up the front edge of the keyboard ➊ and swing it back toward
the display (Figure 5-19).
4. Release the ZIF (zero insertion force) connector to which the
keyboard cable is attached
➋.
5. Disconnect the keyboard cable from the system board
➌.
Figure 5-19. Releasing the Keyboard and Disconnecting the
Keyboard Cable
6. Remove the keyboard.
IMPORTANT: When installing the keyboard, align the three tabs on the
back edge of the keyboard with the slots in the EMI shield.
To Next Page
Loading...
