5-36 Removal and Replacement Procedures
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: David Calvert Saved by: JAbercrombie Saved date: 04/05/00 1:32 PM
Part Number: 177845-001 File name: CH05.doc
5. If installed, remove the RJ11 cover from the left side of the computer
➊ (Figure 5-32).
6. Disconnect the diskette drive LIF (low insertion force) cable from
the system board
➋.
7. Remove the system board from of the base assembly
➌.
Figure 5-32. Removing the System Board
IMPORTANT: When installing the system board, make sure the
diskette drive cable does not get trapped underneath the system board.
To Next Page
Loading...
