4–10 Reference Guide
Operation
By selecting settings in the monitor’s Energy Saver utility, you
can also program the monitor to enter into the reduced power
state at a predetermined time. When the monitor’s Energy Saver
utility causes the monitor to enter the reduced power state, the
Power LED blinks amber.
Sleep Timer Mode
The Sleep Timer mode is an energy-saving feature that enables
you to set a time for the monitor to power on and off at the same
time every day. This also extends the life of the backlight bulbs in
the monitor. The Sleep Timer has five settings:
■
Set Current Time
■
Set Sleep Time
■
Set On Time
■
Timer: On/Off
■
Sleep Now
To set the timer:
1. Press the Select button on the monitor front panel to display
the Advanced Menu.
2. Scroll down and highlight Management.
3. Press the Select button to select Management.
4. Scroll down and highlight and select Sleep Timer > Set
Current Time.
✎
You must set the current local time before you reset the time for
Sleep Time or On Time. Note that the time is displayed in a 24
hour clock format. For example, 1:15 p.m. displays as 13 hours
15 minutes.
5. Press the Select button once to enter the adjustment mode for
hours.
To Next Page
Loading...
Need help?
General
