5–6 Maintenance and Service Guide
Removal and Replacement Procedures
b. Remove the two TM2.5 × 7.0 screws 1 that secure the
battery bay space saver to the notebook (Figure 5-3).
c. Slide the battery pack lock latches 2 to the right.
d. Slide and hold the battery pack release latch
3 to the
right.
e. Use the notch 4 in the battery bay space saver to swing
the front edge of the space saver up and back
5.
f. Remove the battery bay space saver.
Figure 5-3. Removing the Battery Bay Space Saver
Reverse the preceding procedure to install the battery bay space
saver.
307503-003.book Page 6 Friday, April 4, 2003 3:37 PM
To Next Page
Loading...
