EasyManuals Logo

Compaq dc5850 - Microtower PC Hardware Reference Guide

Compaq dc5850 - Microtower PC
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
13. Connect external cables to the installed card, if needed. Connect internal cables to the system
board, if needed.
14. Replace the computer access panel.
15. Reconnect the power cord and any external devices, then turn on the computer.
16. Lock any security devices that were disengaged when the access panel was removed.
17. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for
instructions on using Computer Setup.
Drive Positions
Figure 2-14 Drive Positions
1 Two 5.25-inch external drive bays for optional drives (optical drives shown)
2 One 3.5-inch external drive bay for optional drive (media card reader shown)
3 Primary 3.5-inch internal hard drive bay
4 Secondary 3.5-inch internal hard drive bay for optional hard drive
To verify the type, size, and capacity of the storage devices installed in the computer, run Computer
Setup. Refer to the Computer Setup (F10) Utility Guide for more information.
ENWW Drive Positions 21

Other manuals for Compaq dc5850 - Microtower PC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Compaq dc5850 - Microtower PC and is the answer not in the manual?

Compaq dc5850 - Microtower PC Specifications

General IconGeneral
MemoryUp to 8 GB DDR2 SDRAM
Form FactorMicrotower
AudioIntegrated High Definition audio
Power Supply300W
ProcessorAMD Athlon X2, AMD Athlon, AMD Sempron
StorageSATA 3.0 Gb/s Hard Drives
GraphicsIntegrated ATI Radeon 3100 graphics
Optical DriveDVD-ROM, DVD+/-RW
Operating SystemWindows Vista
Expansion Slots1 PCI Express x16, 2 PCI Express x1
NetworkIntegrated Gigabit Ethernet
Ports1 serial, 1 parallel, 1 VGA, 1 RJ-45, audio in/out

Related product manuals