15
Figure 13 Logon screen
4. Enter user name and password. The default user name is "Administrator" or "Operator" depending
which account was set with bmcc. The password is blank by default, but can be changed during
DASH account setup with bmcc.
© 2008 Hewlett-Packard Development Company, L.P. The information in this document is subject to change without notice. The
only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
512666-001, 11/2008
To Previous Page
Loading...
