Reference Guide
A-3
Writer: Dianne Fielden Saved by: Holly Jahangiri Saved date: 07/24/97 4:39 PM
Pages: 8 Words: 1702 Template: c:\template\commercial\commapp.dot
File Name Appa.doc Part Number 308336-001
The power management feature of your computer is compatible
with any network operating system or environment that supports
APM1.1. This means the users in those environments will not be
disconnected from the network during the low-power operating
state.
The Power Management feature, when used in conjunction with
an external Energy Star compliant monitor, will support the
power-down features of the monitor. The Power Management
feature allows an external monitor to go into low-power mode
when the energy save timeout occurs. To take advantage of this
energy savings, the monitor Power Management feature has
been preset to power down the monitor after 15 minutes of
system inactivity. Refer to the “Power Management” section of
this guide for instructions on modifying or disabling this
feature.
CAUTION:
Using the Energy Save Monitor feature with non
Energy Star compliant monitors may cause video distortion when
the Energy Save timeout occurs.
European Notice
Products with the CE Marking comply with both the EMC
Directive (89/336/EEC) and the Low Voltage Directive
(73/23/EEC) issued by the Commission of the European
Community.
Compliance with these directives implies conformity to the
following European Norms:
■
EN55022 (CISPR 22)—Radio Frequency Interference
■
EN50082-1 (IEC801-2, IEC801-3, IEC801-4)—Electro-
magnetic Immunity
■
EN60950 (IEC950)—Product Safety
Canadian Notice
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du Canada.
To Next Page
Loading...
